Cookies auf der SKF Webseite

Wir von SKF verwenden Cookies auf unserer Website, um die angezeigten Informationen optimal auf die Interessen der Besucher abzustimmen, wie z. B. auf die bevorzugte Länder- oder Sprachwahl.


Standard housing design

Designs and variants

FNL flanged housings are non-split housings that have:
  • a triangular flange for sizes up to and including 13 (fig. 1)
  • a square flange for larger sizes (fig. 2)
FNL housings are supplied with a cover:
  • for shaft ends (fig. 3), designation suffix A
  • for through shafts (fig. 4), designation suffix B
Housings with a centring recess
  • can be centred on a shoulder, provided either by machining the wall or by attaching a guide ring to the wall (table 1)
  • are supplied on request
  • are identified by the designation suffix P, e.g. FNL 511 BP

When the housings are centred on a shoulder, the attachment bolts are not subjected to shear forces.

Housings with a grease escape hole
  • have the hole machined in the cover (fig. 8)
  • are supplied on request
  • are identified by the designation suffix V, e.g. FNL 511 AV
Housing material
  • grey cast iron
Paint, corrosion protection

FNL flanged housings are painted black (RAL 9005). The paint:

  • is a water based alkyd/acryl paint
  • protects the housing in accordance with ISO 12944-2, corrosivity category C2 (i.e. exterior atmospheres with low level of pollution, interior atmospheres where condensation may occur)
  • is not affected by most lubricating or engine oils, cutting fluids or alkalescent washing chemicals
Housings can be repainted with most water or solvent based 1- or 2-component paints. Unpainted surfaces are protected by a solventless rust inhibitor.
Dimension standards
FNL flanged housings:
  • are not standardized either nationally or internationally
  • are dimensionally interchangeable with the earlier 7225(00) housings
Sealing solutions
FNL flanged housings are supplied with low-friction, double-lip grease seals (fig. 9.) The information in table 2 should be used as a guideline and does not substitute for testing a seal in its application.

If additional seals are needed, they can be ordered separately with the prefix TFL followed by a number indicating the size, e.g. TFL 511.

SKF logo